Article List
- How Does A Floor Spring Meet A Patch Fitting?On site, the two parts arrive separately and are installed by different trades. A floor spring is set into the ground and cemented before the glass is hung. A bottom patch fitting is already clamped to the door by the time the glass is lifted into place. Nothing connects them until the final step, w
- Glass Door Handle Material And Finish: An Environment-Led GuideA glass door handle rarely fails all at once. It changes first at the surface: a faint bloom around the fixing, a dull patch where hands land, a colour that has drifted away from the frame.By the time the change is visible, the decision behind it is months old. It was made on a specification sheet tProduct News November 10, 2026
- Automatic Sliding Door Kit: What To Verify Before OrderingAn automatic sliding door arrives on site as a set, not as a single machine. The operator, the track, the rollers, the sensors and the small fixing parts are packed together, and the configuration is settled at the quotation stage rather than during installation. This guide sets out a verification sProduct News November 03, 2026
- Handrail Fittings for Stairs, Balconies And Pool SurroundsHandrail fittings are counted point by point, not ordered as a set. A straight balcony rail may need no more than an end cap at each end and a pair of flanges to fix it, while a stair that turns at several landings and branches onto a second flight may need elbows, tees and base plates at a dozen poProduct News October 29, 2026
- Surface-Mounted Vs Concealed Door Closer: How To ChooseWhen a door closer is specified for a project, closing speed and price usually come up first. The decision that shapes everything else, however, is where the body sits. A door closer can be mounted on the surface of the door, where the mechanism stays in full view, or built into the door frame, wherProduct News October 20, 2026
- How To Choose The Right Glass Clamp Material for Your ProjectA glass clamp is the fitting that holds a fixed glass panel in place, and the material it is made from decides how it answers to moisture, load and time. Two clamps can share the same angle, the same size and the same finish, and still perform differently on site because the material underneath is dProduct News October 13, 2026
-
- Shower Hinge Selection Guide for Frameless Glass DoorsFrameless glass shower doors depend on carefully matched hardware forboth movement and structural support. For project buyers, glassfabricators, contractors, and hardware distributors, selecting a showerhinge involves more than choosing a finish. Glass thickness,installation type, door weight, materProduct News September 30, 2026
- Patch Fitting Specifications That Decide Fit And DurabilityA patch fitting is a compact hardware piece that clamps onto the edge of a frameless glass door. It carries the connection points a glass door needs — the bottom point that works with a floor spring, the top point that meets the frame or an L patch fitting, the lock, and the fitting that joins the dProduct News September 22, 2026
- Floor Spring Bulk Order: What To Verify Before You CommitA floor spring bulk order carries one risk that a single-unit order does not: the same model goes into every door on the project. If that model is wrong for the door, the mistake is repeated at every opening.Commercial glass doors vary more than they look. A lobby entrance panel and a meeting room dProduct News September 15, 2026